Fluke Ti20 - Manual (Page 30)

Ti20
Users Manual
2-6
dag108f.bmp
Note
If no image is stored at the current memory location, the right side of the
display is black.
3. Press G (
DONE
) to save the captured image. This will overwrite the current
image location.
Adjusting the Backlight
Backlight ON is recommended for indoor use set the backlight OFF for outdoor
applications and to save battery life. The default backlight setting is ON.
1. From the Home display, press G (
MENU
) five times to access the backlight
function.
2. Press F
(BACKLIGHT
) to toggle the backlight ON and OFF.