Fuji Bikes FRENIC 5000G11S/P11S - Manual (Page 127)

11-1
11. Electromagnetic compatibility (EMC)
11-1 General
In accordance with the provisions described in the European Commission Guidelines Document on Council
Directive 89/336/EEC,Fuji Electric Co., Ltd. has chosen to classify the FRENIC 5000G11S range of Inverters
as "Complex Components".
Classification as a "Complex Components" allows a product to be treated as an "apparatus", and thus permits
compliance with the essential requirements of the EMC Directive to be demonstrated to both an integrator of
FRENIC Inverters and to his customer or the installer and the user.
FRENIC Inverters is supplied `CE-marked', signifying compliance with EC Directive 89/336/EEC when fitted
with specified filter units installed and earthed in accordance with this sheet.
This Specification requires the following performance criteria to be met.
EMC product standard EN61800-3/1997 +A11/2000
Immunity : Second environment ( Industrial environment )
Emission : First environment ( Domestic environment )
Distribution class of Emission
Unrestricted distribution Restricted distribution
Without OPC-G11S-***
FRN025G11S-4UX or more.
FRN030P11S-4UX or more.
FRN-G11S/P11S-2UX
With OPC-G11S-***
FRN-G11S-2UX/4UX all models with OPC-G11S-***.
Card option :OPC-G11S-AIO, DIO, PG, PGA, PG2, SY, RY, PGDIO,
PGRY,
TL
Bus option :OPC-G11S-PDP, DEV, MBP, IBS, COP
Without OPC-G11S-***
FRN020G11S-4UX or less.
FRN025P11S-4UX or less.
WARNING
This is a product of the restricted sales distribution class according to
IEC61800-3.
In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
Finally, it is customer’s responsibility to check whether the equipment conforms to EMC directive.