Fluke DSP-2000 - Manual (Page 93)

Running Individual Tests
Monitoring Network Activity
4
4-17
W
Caution
When using a coaxial T-connector to connect the test tool
to a network, never allow the T-connector to touch a
conductive surface. Such contact could disrupt network
operation by creating a ground loop.
Note
To extend battery life, use the ac adapter/charger when monitoring
network traffic for extended periods. While monitoring network
traffic, the test tool’s automatic power-down function is disabled.
Test Tool
RJ45
Jacks
ENTER
TEST
EXIT
SAVE
1 2 3 4
OFF
PRINT
MONITOR SETUP
SPECIAL
FUNCTIONS
SMART
REMOTE
SINGLE TEST
AUTO
TEST
PC
Test Tool
BNC
Connection
Shown
1 2 3 4 5 6 7 8
PC
1 2 3 4 5 6 7 8
FAULT INFO
DSP-2000 CABLE ANALYZER
gc23f.eps
Figure 4-5. Connections for Monitoring Network Traffic (Model DSP-2000 Shown)