Appendix a using dsp-link, Introduction, Using dsp-link – Fluke DSP-2000 User Manual
Page 159: Appendix a
Advertising
A-1
Appendix A
Using DSP-LINK
Introduction
DSP-LINK is a Windows
program that allows you to do the following:
•
Configure a PC’s serial port for communication with the test tool.
•
Transfer saved Autotest reports and report summaries from the test tool to a
PC.
•
View and print saved Autotest reports and summaries.
•
Transfer test data in CSV format from the test tool to a PC.
•
View and print plots from the last test run.
•
Transfer software updates and new test standards from a PC to the test tool.
The minimum requirements for running DSP-LINK are an 80386 microprocessor
system with 4 M-bytes of RAM, Windows 3.1 software, and a VGA monitor.
Advertising
This manual is related to the following products: