Appendix b glossary, Glossary, Appendix b – Fluke DSP-2000 User Manual
Page 169
B-1
Appendix B
Glossary
10Base2
An IEEE Standard for Thin Coax Ethernet networks: 10 Mb/s transmission, baseband
signaling, 185 meters per coax segment. Also known as Thinlan, Thinnet, or Cheapernet.
10BaseT
An IEEE Standard for unshielded twisted pair Ethernet networks: 10 Mb/s transmission,
baseband signaling, unshielded twisted pair cable. Maximum cable length is 100 meters.
100BaseTX
An IEEE Standard for twisted pair Ethernet networks: 100 Mb/s transmission; baseband
signaling; two-pair, category 5 twisted pair cable. Maximum cable length is 100 meters.
ACR
Attenuation to crosstalk ratio. The difference between NEXT in dB and attenuation in dB.
Good cable performance corresponds to high ACR values (in negative dB), which result
when NEXT is much higher than attenuation.
Anomaly
A location on a network cable where the cable’s impedance changes abruptly.