Fluke DSP-2000 - Manual (Page 48)

DSP-100/2000
Users Manual
2-32
Battery Status Display
To see the charge level of the main unit’s NiCad battery, turn the rotary switch to
SPECIAL FUNCTIONS; then select
Battery Status. To see the charge
level of the smart remote’s battery, connect the smart remote to the main unit (use
the CABLE TEST jack on Model DSP-2000); then use
! to toggle the display.
Note
Connecting the battery charger can change the readings displayed
on the battery status screen. These changes are due to the charger’s
effect on the test tool’s charging circuit.