Furuno GP-7000F - Manual (Page 3)

i
SAFETY INSTRUCTIONS
WARNING
ELECTRICAL SHOCK HAZARD
Do not open the equipment
unless totally familiar with
electrical circuits and
service manual.
Only qualified personnel
should work inside the
equipment.
Turn off the power at the switchboard
before beginning the installation.
Fire or electrical shock can result if the
power is left on.
CAUTION
Observe the following compass safe
distances to prevent interference to a
magnetic compass:
Use the power cable supplied with the
installation materials.
Use of other power cables may cause fire
or damage the equipment.
Use the proper fuse.
Use of the wrong fuse may damage the
equipment.
Observe the following precautions when
handling the transducer cable:
- Keep away from oils.
- Choose a working area where the
cable will not be damaged during
installation.
- Do not paint the cable.
The sheath of the cable is made of
chloroprene (or polyvinyl chloride).
Those materials easily deteriorate in
the presence of organic solvents
(toulene, etc.) found in paints. For
that reason keep the cable away from
ship's paint house.
Display
unit
Standard Steering
compass compass
0.70 m 0.45 m
Organic solvent
Do not apply paint, anti-corrosive sealant
or contact spray to coating or plastic
parts of the equipment.
Those items contain organic solvents that
can damage coating and plastic parts,
especially plastic connectors.