FORD Ranger - Manual (Page 159)

Driving Your Ranger
159
[DR09850(ALL)01/95]
quarter page
art:0021255-A
Transmission control switch (located on the end of the gearshift lever)
* [DR09900(ALL)05/95] To return the transmission to the normal j Overdrive
operation, press the transmission control switch again. The
Transmission Control Indicator Light will not be illuminated
when Overdrive operation resumes. This switch may be used to
select O/D ON or O/D OFF any time the vehicle is being
driven.
* [DR09950(ALL)05/94] When starting your vehicle, the overdrive system will
automatically be in the normal overdrive mode.
* [DR10100(ALL)01/95] When to use 2 (Second)
* [DR10200(ALL)01/95] Use 2 (Second) to start-up on slippery roads or to provide
additional engine braking on downgrades. This position
provides 2 (Second) gear operation only.
* [DR10300(ALL)01/95] When to use 1 (Low)
* [DR10400(ALL)04/95] Use 1 (Low) to provide maximum engine braking on steep
downgrades. Upshifts from 1 (Low) can be made by manually
shifting to 2 (Second) or
j (Overdrive). Selection of 1 (Low)
gear provides only low gear operation from start-up. Selection
of 1 (Low) while at higher speeds provides a shift to second
gear, and a shift to first gear will occur after the vehicle
decelerates to the proper speed.
File:10undrr.ex
Update:Wed May 1 13:52:06 1996