FORD Ranger - Manual (Page 96)

96
[SC09375(ALL)10/94]
quarter page
art:0021255-A
Transmission control switch
% * [SC09400(ALL)08/95] Accelerating With the Speed Control Operating
* [SC09500(ALL)08/95] You can use the accelerator pedal to speed up momentarily.
When you take your foot off the accelerator, the vehicle will
return to the set speed.
% * [SC09600(ALL)08/95] Resetting the Speed Control
* [SC09700(ALL)06/95] To reset the speed control to a lower speed, press and hold the
COAST switch. Let your vehicle slow down to the desired
speed and release the COAST switch.
* [SC09750(ALL)10/94] Your vehicle has a “tap-down” feature that allows you to
decrease your current speed in increments of 1 mph (1.6 km/h)
by a momentary tap of the COAST switch. Multiple taps of the
COAST switch will decrease your vehicle speed 1 mph
(1.6 km/h) for each tap. For example, if you are currently set at
65 mph (104 km/h) and tap the COAST switch 5 times your
vehicle speed will decrease and set at 60 mph (96 km/h).
* [SC09800(ALL)06/95] To reset the speed control to a higher speed, you can follow
any of these procedures:
[SC09900(ALL)08/94]
■ Accelerate to the desired speed, then press the SET ACCEL
switch and release it immediately.
[SC10100(ALL)08/94]
■ Press and hold the SET ACCEL switch, then accelerate to
your desired speed and release the switch.
File:07unscr.ex
Update:Wed May 1 13:46:58 1996