Seating and safety restraints – FORD 2000 Mustang User Manual

Page 68

Advertising
background image

The front and rear outboard safety restraints in the
vehicle are combination lap and shoulder belts. The
front passenger and rear seat outboard safety belts
have two types of locking modes described below:

Vehicle sensitive mode

The vehicle sensitive mode is the normal retractor
mode, allowing free shoulder belt length adjustment
to your movements and locking in response to
vehicle movement. For example, if the driver brakes
suddenly or turns a corner sharply, or the vehicle
receives an impact of approximately 8 km/h (5 mph)
or more, the combination safety belts will lock to
help reduce forward movement of the driver and
passengers.

The seat belt system can also be made to lock
manually by quickly pulling on the shoulder belt.

Automatic locking mode

In this mode, the shoulder belt is automatically
pre-locked. The belt will still retract to remove any
slack in the shoulder belt.

The automatic locking mode is not available on the
driver safety belt.

When to use the automatic locking mode

Anytime a child safety seat is installed in a

passenger front or outboard rear seating position
(if equipped). Children 12 years old and under
should be properly restrained in the rear seat
whenever possible. Refer to Safety Restraints for
Children
or Safety Seats for Children later in
this chapter.

Seating and safety restraints

68

Advertising