Seating and safety restraints – FORD 2000 Mustang User Manual

Page 86

Advertising
background image

5. To put the retractor
in the automatic
locking mode, grasp
the shoulder portion of
the belt and pull
downward until all of
the belt is extracted
and a click is heard.

6. Allow the belt to retract. The belt will click as it
retracts to indicate it is in the automatic locking
mode.

7. Pull the lap belt
portion across the child
seat toward the buckle
and pull up on the
shoulder belt while
pushing down with
your knee on the child
seat.

8. Allow the safety belt
to retract to remove
any slack in the belt.

9. Before placing the
child in the seat,
forcibly tilt the seat
forward and back to
make sure the seat is
securely held in place.

10. Try to pull the belt out of the retractor to make
sure the retractor is in the automatic locking mode
(you should not be able to pull more belt out). If the
retractor is not locked, unbuckle the belt and repeat
steps two through nine.

Check to make sure the child seat is properly
secured before each use.

Seating and safety restraints

86

Advertising