FUJITSU LIFEBOOK B142 - Manual (Page 33)

Thr
ee
U s i n g Y o u r L i f e B o o k B S e r i e s
L i f e B o o k B S e r i e s f r o m F u j i t s u
23
INTEGRATED QUICK POINT ™
POINTING DEVICE
The Quick Point pointing device is composed
of a small joystick-like disc pointer control and
two buttons located in front of the keyboard. The
Quick Point pointing device functions like a
mouse, and moves the cursor around on the
screen – up , down , left
and right . A
light pressure with the tip of your finger is all that
is required to operate the Quick Point. The more
pressure you use the faster the cursor will move.
The second part of the Quick Point pointing
device – the buttons – function as mouse buttons,
and the functions they perform depend on the
application you are using. Figure 3-3 shows the
position of the Quick Point and buttons.
P O I N T
An external USB or PS/2 mouse can be
used in combination with the Quick Point
pointing device. To use the PS/2 mouse
the BIOS setup has to be modified. Please
refer to the BIOS Guide on our website.
(See page 44 for more information.)
Right Button Left Button
Quick Point
Figure 3-3 Quick Point Pointing Device
Cursor
Clicking
Clicking means pushing and releasing a button.
To left-click, move the screen cursor to the item
you wish to select, press the left pointing device
button once, and then immediately release it.
To right-click, move the mouse cursor to the
item you wish to select, press the right pointing
device button once, and then immediately
release it. (Figure 3-4.)