Meridian Audio D-ILA 1080MF2 - Manual (Page 19)

19
2
1
1
Connect the supplied power cord to the power in-
put terminal of this unit
2
Insert the main plug of the supplied power cord
into the wall outlet
Connecting the Power Cord (supplied)
After all devices have been connected, connect the supplied power cord.
Power Cord (supplied)
(e.g.)
Lens Cap
When using this unit, remove the lens cap
●
Be sure to fit the lens cap on when this unit is not in use to keep out
dirt.
● Do not project with the lens cap attached. The lens cap may be de-
formed by heat or malfunction of this unit may occur.
● Since the power requirement of this unit is high, insert the power plug directly into a wall outlet.
●
When not using devices, remove the power plug from the wall outlet.
● Do not use power cords for connection other than those supplied.
● Do not use a power voltage different from that which is indicated.
● Do not cut, tear or modify the power cords. Also, do not place a heavy object on, heat or stretch the power cords
as this may cause damage to the cords.
● Do not insert or pull out plugs with a wet hand.
Cautions Against Fire and Electric Shock