Cleaning and replacing the filter – Meridian Audio D-ILA 1080MF2 User Manual

Page 31

Advertising
background image

31

1

Pull out the plug from the power outlet

Pull out the power plug from the outlet while the [STAND
BY] indicator is still on.

2

Remove the lower filter

Withdraw the filter backwards along the rail in the direc-
tion of the arrow.

3

Remove the inner filter

Push up and lift the claw at the base of the inner filter,
followed by drawing out the filter.

4

Clean the filter

Clean the filter with water and dry it, avoiding direct sun-
light. In extremely soiled cases, use of a neutral deter-
gent is recommended.

5

Reinstall the lower filter

Reinstall the lower filter by inserting it into this unit.

6

Reinstall the inner filter

Install after engaging the 2 claws at the upper part of the
inner filter to this unit.

Cleaning and Replacing the Filter

Clean the filter regularly or air intake efficiency may deteriorate and malfunction may occur. If the filter is extremely dirty and
cannot be cleaned, or if it is damaged, replace the filter with a new one (lower filter: LC32087-002A / inner filter: LC32058-
002A). Otherwise, dirt may enter the unit and appear on the screen, preventing you from enjoying the video fully. If dirt has
entered the unit or if you need information about the filter, please consult your authorized dealer.

The air inlet filter on the right side cannot be removed. Please clean this filter regularly with, for example, a vacuum
cleaner.

Lower Filter

Inner Filter

Claw

Lower Filter

Inner Filter

Claw

Put on rubber gloves when using a neutral detergent.

After washing a filter with water, make sure that the
filter is completely dry before reinstalling. Otherwise,
electric shocks or malfunctions may occur.

Do not clean lower filters and inner filters with a vacuum
cleaner. Since these filters are soft, they may be dam-
aged if they are sucked into the vacuum cleaner.

Advertising