Meridian Audio D-ILA 1080MF2 - Manual (Page 25)

25
¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥
Item values shown in { } are factory settings.
1 “Image adjust” Menu
To adjust images.
On the “Image adjust” menu, you can adjust the following items.
“Gamma”
Switches the gradation characteristics of the image. Select
your preference setting values according to the image to be
viewed.
Setting Values : “NORMAL”, “A”, “B”, “CUSTOM” {“NORMAL”}
“CUSTOM”
: Use when setting Gamma with optional soft-
ware. The picture quality is same as “NOR-
MAL” for factory setting.
“Color temp.”
Adjusts the color temperature of the projected image.
Setting Values : “D65”, “USER1”, “USER2” {“D65”}
“RED” : -255 to 0 {0}
“GREEN” : -255 to 0 {0}
“BLUE” : -255 to 0 {0}
“Test pattern”
Use this to adjust focus, screen size or picture quality. There
are 10 types of test patterns. Press the [ENTER] or [TEST]
button to alter the test pattern to be projected.
2 “Set up” Menu
The following items can be set at the “Set up” menu.
“Menu position”
Adjusts the display position of the menu screen.
Setting Values (menu display position):
{ }
“Mask”
Masks (hides) the outer area of the projected image.
Setting Values : “2.5%”, “5%”, “Off” {“Off”}
“Source”
Sets the image format for video image signals that are input to
this unit.
Ensure to align settings between this unit and the digital video
processor that is connected.
Setting Values : “60P”, “50P” {“60P”}
3 “Options” Menu
The following items can be set at the “Options” menu.
“Menu display”
Adjusts the display duration of the menu screen.
Setting Values : “15 sec”, “On” {“15sec”}
“Flip H”
Reverses image to the left or right.
Setting Values : “On”, “Off” {“Off”}
“Flip V”
Inverses image upside down.
Setting Values : “On”, “Off” {“Off”}
“Picture shift”
When projecting images with black bands at the top and bottom
(cinema image), use this to move the image up or down while
retaining one of the black bands at the upper or lower end.
Setting Values : -30 to 30 {0}
“Sleep time”
Sets the lapse time before automatically switching the unit to
the standby mode when there is no signal input.
Setting Values : “15 min”, “30 min”, “60 min”, “Off” {“Off”}
“RS232C (bps)”
Sets the communication speed (signal transmission speed)
when communicating with a computer using the RS-232C
terminal. Ensure that this is same as the rate set at the
computer.
Setting Values : “9600”, “19200” {“19200”}
4 “Information” Menu
“Lamp Time”
Displays the accumulated hours of usage of the light-source
lamp.
Menu Configuration