Force10 Networks Force10 TeraScale E-Series E1200i - Manual (Page 30)

30 Installing the DC Chassis
2. Adjust the chassis mounting brackets to the desired front-rear position and add a 23-inch adapter
brackets as required.
3. Using a hand cart, pallet jack, or forklift, align the rack-mount holes with the cabinet holes.
4. Insert rack-mounting screws in the holes that are not obscured by the metal chassis shipping cover.
Tighten the screws.
5. Loosen and remove the screws attaching the chassis shipping cover. Remove the shipping cover.
6. Insert the remaining mounting screws and tighten to secure the chassis in the cabinet.
Step Task