Force10 Networks Force10 TeraScale E-Series E1200i - Manual (Page 84)

84 System Boot
8.
show
default-gateway
default-gateway
ip-address
(Optional) Use the
show default-gateway
command to view gateway
information.
If your server is on the same subnet, you do not need to configure a gateway
parameter.
If your server is not on the same subnet, use the
default-gateway
ip-address
command to set the gateway IP address.
9.
dir flash:
dir slot0:
Use the
dir flash:
command to list files stored on the internal flash device.
Use the
dir slot0:
command to list files stored on the external flash device.
Step Command Task (continued)
BOOT_USER # show interface management ethernet
No IP address set for interface management ethernet 0/0!
BOOT_USER # interface management ethernet ip address 1.2.3.4 255.255.0.0
Management ethernet 0/0 IP address: 1.2.3.4 255.255.0.0
BOOT_USER # show interface management ethernet
Management ethernet IP address: 1.2.3.4:ffffff00
BOOT_USER #
BOOT_USER # show default-gateway
No gateway IP address specified!
BOOT_USER # default-gateway ip 1.2.3.5
Gateway IP address 1.2.3.5
BOOT_USER # show default-gateway
Gateway IP address: 1.2.3.5
BOOT_USER #
B OOT_USER # dir flash:
Displaying files in flash:
size date time name
-------- ------ ------ --------
11187685 FEB-15-2002 05:37:58 e1200-.bin
11031398 FEB-23-2002 22:42:46 E1200-3.bin
9280984 FEB-17-2002 21:02:36 E1200-2.bin
10778521 FEB-18-2002 22:53:26 E1200-3.1.bin
1787 FEB-23-2002 22:42:46 startup-config
BOOT_USER #