Yamaha DV-C6860 - Manual (Page 11)

7 En
English
Connections
If your AV receiver has video output jacks,
connect your receiver and then your TV
so that you can use one TV for several
different video sources (LD, VCR, etc.) by
simply switching the input source selector
of your AV receiver.
This unit has three types of video output
jacks. Use the one that corresponds to the
input jacks of the component to be
connected.
SCART terminal <A>
If your TV has only a terminal for video
input, you can connect the TV directly to
this unit.
Connect AV terminal of this unit to
SCART input terminal of your TV using a
commercially available SCART cable.
Note:
– Ensure that the “TV” indication on SCART
cable is connected to the TV set and “DVD”
indication on SCART cable is connected to
this unit.
Component video jacks <B>
Component video connections achieve
higher fidelity color reproduction than
S-video connections by transmitting video
signals on separate wires for luminance
(Y: green) and chrominance (P
B : blue,
P R : red).
Connect VIDEO OUT - COMPONENT
(Y, P
B /C B , P R /C R ) jacks of this unit to
component input jacks of your AV receiver
and then to those of your TV using a
commercially available component cable.
Observe the color of each jack when you
make connections. If your AV receiver
does not have component output jacks,
you can achieve a better video image by
connecting the component output jacks of
this unit directly to the component input
jacks of your TV.
Composite video jack <C>
Connect VIDEO OUT - VIDEO jack of this
unit to the video input jack of your AV
receiver and then to that of your TV using
the supplied video cable.
Video connections
AUDIO
OUT
DIGITAL
OUT VIDEO OUT
V I D E O
COAXIAL COMPONENT
Y
P B /C B P R /C R
S VIDEO
OUT
S VIDEO
IN
COMPONENT
VIDEO OUT
COMPONENT
VIDEO IN
VIDEO
OUT
VIDEO
IN
COMPONENT
VIDEO
VIDEO
<B> <A> <C>
Y P B /C B P R /C R
V P R P B Y
P R P B Y
AV receiver
This unit
TV
Video pin
cable
(supplied)