Yamaha DV-C6860 - Manual (Page 16)

12 En
Disc Operations
IMPORTANT!
– If the inhibition icon (
or X)
appears on the TV screen when a
button is pressed, the function for
that button is not available on the
current disc or at the current time.
– Depending on the DVD or VIDEO
CD disc, some operations may
operate differently or be
restricted.
– Do not push on the disc tray or put
any objects other than discs on the
disc tray. Doing so may cause the
disc player to malfunction.
1 Press STANDBY/ON on the front panel
or on the remote control.
2 Press / (OPEN/CLOSE) on the front
panel to open the disc tray.
3 Place discs in the disc tray with the printed
side up.
4 Press B/; (PLAY/PAUSE) on the front
panel or PLAY (B) on the remote
control.
➜ The disc tray closes and playback starts
automatically for all of the loaded discs
in the tray in sequence.
5 To stop playback, press 9 (STOP) on the
front panel or STOP (9) on the remote
control.
• To play back a specific disc directly,
press DISC SKIP repeatedly on the
remote control or press DISC (1, 2, 3,
4, 5) on the front panel.
• Press PLAYXCHANGE on the front
panel to open the disc tray, and then
reload or unload discs without
interrupting current disc playback.
• Playback stops after all discs have been
played.
• When the disc tray is open, press
B/; (PLAY/PAUSE),
/ (OPEN/CLOSE),
PLAYXCHANGE or
DISC (1, 2, 3, 4, 5) to close the disc
tray automatically.
Unless stated otherwise, all operations
described here are carried out using the
supplied remote control.
Pausing playback
1 During playback, press PAUSE (;).
➜ Playback is paused and the sound is
muted.
2 Press PAUSE (;) again to select the next
picture frame.
3 To resume normal playback, press
PLAY (B).
Basic playback
General operation
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the disc.