Fusion TYPHOON L50B PRO - Manual (Page 10)

8
Lilo CHARGE 3.0A
C=3000mAh 10.8Vp
INC BATT TYPE
DEC
ENTER
Lilo CHARGE 3.0A
C=3000mAh 10.8Vp
INC DEC
START
BATTERY CHECK
WAIT PLEASE....
CHG 0:00 00000
LI + 3.00A 12.000V
Lilo CHARGE 3.0A
C=3000mAh 10.8Vp
INC DEC
Lilo CHARGE 3.0A
C=3000mAh 10.8Vp
INC DEC
BALANCER CON.
NOT CONNECTED
BALANCER CON.
CONNECTED
Lithium Type
Lilo
ENTER
Lithium Type
Lilo
DEC
Lithium Type
LiPo
DEC
INC
Lithium Type
LiFe
INC
ENTER
ENTER
This charger is capable of charging up to 6 cell Lithium-Ion, Lithium-Polymer or
LiFePO4 batteries. It uses “constant current / constant voltage” regime in order to
fully charge these Lithium batteries. Constant current is delivered during the fast
charge. When the voltage of the Li-Ion, Li-Po battery and LiFePO4 reaches approx
4.1V, 4.2V, and 3.7V per cell respectively, the charger starts to change its charge
method from “constant current” to “constant voltage”. The “constant voltage” allows
the battery to dictate how much current the charger should deliver for safe, full
charges. When the current drops below approx 1/10th current of the user selected
battery capacity, the charger will stop charging as the battery is fully charged.
Setting Battery Capacity
Adjust the desired battery capacity from 100mAh to 6000mAh
(50mAh per step) with the INC & DEC buttons. Press the ENTER
button to confirm the setting.
Lilo CHARGE 3.0A
C=3000mAh 10.8Vp
Setting Battery Voltages For Li-Ion Battery Pack
Select the correct total battery voltage to be charged or
discharged with the INC & DEC buttons – 3.6V, 7.2V, 10.8V,
14.4V and 18.0V [Vpack].
LiIon CHARGE 3.0A
C=3000mAh 10.8Vp
Lithium Modes (Li-Ion/Li-Po/Li-Fe)