Furuno GP-3500F - Manual (Page 200)

11. VIDEO SOUNDER OPERATION
11-28
11.15.1 Audio alarm on/off
The audio alarm sounds whenever an alarm setting is violated. You can enable
or disable the audio alarm.
1. Press the [MENU] key to show the main menu.
2. Press the [6] key to show the ALARMS SETUP menu.
AUDIO ALARM 1. SHORT 2. LONG 3. CONT 4. OFF
ARRIVAL/ANCHOR WATCH 1. ARRIVAL 2. ANCHOR 3. OFF
RANGE TO MONITOR 0.050 nm
XTE/BOADER ALARM 1. XTE 2. BOAD 3. OFF
RANGE TO MONITOR 0.050 nm
PROXIMITY ALARM
1. ON 2. OFF
SPEED ALARM 1. INSIDE 2. OUT 3. OFF
MINIMUM SPEED 000.0 kt
MAXIMUM SPEED 030.0 kt
TRIP LOG ALARM 1. ON 2. OFF
DIST TO MONITOR 0000.1 nm
TEMPERATURE ALARM 1. INSIDE 2. OUT 3. OFF
MINIMUM TEMPERATURE +00.0 C
MAXIMUM TEMPERATURE +30.0 C
SHEAR ALARM 1. ON 2. OFF
GRADIENT OF TEMP 00.1 C 0.1 10.0
INTERVAL 010 MIN 10 120 MIN
BOTTOM ALARM 1. ON 2. OFF
DEPTH 0000.0 ft
RANGE 00.0 ft
FISH ALARM 1. ON 2. OFF
DEPTH 0000.0 ft
RANGE 00.0 ft
FISH ALARM (B/L) 1. ON 2. OFF
DEPTH 0000.0 ft
RANGE 00.0 ft
6. ALARM SETUP
TURN KNOB TO SELECT MENU.
SELECT THE ITEM OF EACH MENU BY TRACKBALL.
Alarms setup menu
3. Rotate the [ENTER] knob to select AUDIO ALARM.
4. Press the appropriate numeric key to select audio alarm type or turn the
audio alarm off.
SHORT: Short beeps
LONG: Long beeps
CONT: Continuous beep
OFF: No beep
5. Press the [MENU] key several times to close the menu.