Furuno GP-3500F - Manual (Page 99)

7. NAVIGATION
7-5
Navigating to ports, port service
Some Nav-Chart™ chart cards have a port service list which shows services
available at ports or harbors. You can use the list to set destination as follows.
1. Referring to page 7-1 for the procedure, set SET TO GOTO METHOD to “3.
NEAR SERVICE” or “4. PORT SERVICE.”
NEAR SERVICE displays the port service list.
PORT shows a list of ports in your area.
2. Press the [DISP] key, and then select PLOTTER NAV INFO 1 or PILOT NAV
INFO 1 display.
3. Press the [DISP] key. If the cursor disappears, press the [CURSOR ON/OFF]
key.
4. Press the [GOTO] key.
A list of ports or port services appear depending on what you selected at step 1.
¤
¡
¡
¡
¡
¡
¡
¡
▼
PORT SERVICE
PORT SERVICE
ACCIAROLI
ACQUAMORTA
AGNONE S. NICOLA
AGROPOLI
AMALFI
BAIA
CAPRI
CASA MICCIOLA-ISCHIA
▲
Near service list (NavChart )
▼
TM
Port service list
(NavChart , Italy) TM
Port service lists
5. Do one of the following depending on selection made at step 1.
PORT SERVICE
Rotate the [ENTER] knob to select port and then press the [ENTER] knob. Make
a route using the trackball and [ENTER] key. (If you want to go directly to that
port, simply press the [ENTER] knob twice.