Furuno GP-3500F - Manual (Page 96)

7. NAVIGATION
7-2
5. Rotate the [ENTER] knob to select SET GOTO METHOD.
0-1 DISPLAY SETUP 1/2
NEXT PAGE
LANGUAGE
1. ENGLISH
KEY BEEP 1. ON 2. OFF
SPEED SOURCE 1. INT GPS 2. NMEA SOG 3. NMEA STW
4. INTERNAL E/S
NMEA SPEED CALIB +00% (-50
∼
+50%)
TEMPERATURE SOURCE1. NMEA 2. INTERNAL E/S
NMEA TEMP CALIB +00.0
°
F (-40
∼
+40
°
F)
DEPTH SOURTH 1. NMEA 2. INTERNAL E/S
NMEA DEPTH CALIB +000.0 ft (-15
∼
+100ft)
LAT/LON DISPLAY 1.DD˚MM.MM' 2.DD˚MM.MMM'
3.DD˚MM.MMMM' 4.DD˚MM'SS.S
RANGE & SPEED UNITS 1.nm,kt 2.km,km/h 3.sm,mph
DEPTH UNIT 1.m 2.ft 3.fa 4.pb
TEMPERATURE UNIT 1.˚C 2.˚F
TIME DISPLAY 1. 12 HOURS 2. 24 HOURS
BEARING READOUT 1. TRUE 2. MAGNETIC
MAGNETIC VARIATION 1. AUTO 2. MANUAL 07.0
°
W
HEADING MARKER 1. ON 2. OFF
COURSE VECTOR 1. LINE 2. VECTOR 3. OFF
WAYPOINT SWITCHING 1. PERPENDICULAR 2. ARRIVAL CIRCLE
RNG & BRG MODE
1. RHUMB LINE 2. GREAT CIRCLE
SET GOTO METHOD 1. 1 POINT 2. 35 POINTS
3. NEAR SERVICE 4. PORT SERVICE
RANGE/SCALE 1. RANGE 2. SCALE
SCALE DISPLAY 1. ON 2. OFF
GPS STATUS 1. ON 2. OFF
TURN KNOB TO SELECT MENU.
SELECT THE ITEM OF EACH MENU BY TRACKBALL.
Display setup menu
6. Press the appropriate numeric key to select the method to use:
1 POINT: Setting a single quick point as waypoint.
35 POINTS: Setting multiple quick points (up to 35) as a route.
NEAR SERVICE, PORT SERVICE: See page 7-5.
7. Press the [MENU] key several times to close the menu.