FUJITSU C150-E049-02EN - Manual (Page 128)

M3099GX/GH OEM Manual 3-95
INTERFACE
Upper Left X: 00000000h
Upper Left X field specifies X coordinate of upper-left corner of
endorser strings rectangle in 1/1200 inch. This field applies signed
long integer. This scanner cannot specify Upper Left X coordinate of
print position. The 00000000h is regarded as default.
Upper Left Y:
Upper Left Y field specifies Y coordinate of upper-left corner of
endorser strings rectangle to be printed in 1/1200 inch. This field
applies signed long integer. This scanner does not check validity in
this field.
The base point of endorser string is Upper-Left likewise SET
WINDOW. Location of Endorser Strings is different from printer
strings. This specifies upper-left corner of the rectangle.
Font: 00h(default)
Font field specifies character fonts to be printed. One Endorser Data
could have one font.
Table 3.78 Font
Value
00h
01h to 7Fh
80h to FFh
Description
Default
Reserved
Downloaded
Size: 00h(default)
Size field specifies character size to be printed in dots. One Endorser
Data could have one size available. This field specifies character
height in dots. If zero is specified, default is used.
REVS: 0b
REVS bit specifies Endorser String is reversed. The Endorser String
is printed from last character. This scanner does not support this bit.
#03.pm5 98.2.22, 1:33 PM 95