FUJITSU C150-E049-02EN - Manual (Page 62)

M3099GX/GH OEM Manual 3-29
INTERFACE
Table 3.7 Operation Code Types
Description
Reserve a logical unit
Release a previously reserved logical
unit
Requests information regarding
parameters of target and its attached
peripheral device(s).
Requests the target transfer sense
data to the initiator
Request the target to perform
diagnostic operations on itself
Start/Stop endorser function
Check if the logical unit is ready
Specify windows within the
scanning range of the device.
Transfers data from initiator to
target
Provids positioning functions (ADF
Feed in/out)
Requests the target begin a scan
operation
Requests the target transfer data to
the initiator
Specify logical unit, peripheral
device parameters from the initiator
to the target
Report parameters from the target to
the initiatot
Command
RESERVE UNIT
RELEASE UNIT
INQUIRY
REQUEST SENSE
SEND DIAGNOSTIC
ENDORSER
TEST UNIT READY
SET WINDOW
SEND
OBJECT POSITION
SCAN
READ
MODE SELECT(6)
MODE SENSE(6)
Operation
Code(hex)
16
17
12
03
1D
C1
00
24
2A
31
18
28
15
1A
#03.pm5 98.2.22, 1:31 PM 29