Before setting surface controls – FRIGIDAIRE 316902300 User Manual

Page 10

Advertising
background image

10

BEFORE SETTING SURFACE CONTROLS

Flat bottom and straight

sides.
Tight fitting lids.
Weight of handle does

not tilt pan. Pan is well

balanced.
Pan sizes match the

amount of food to be

prepared and the size of

the surface element.
Made of a material that

conducts heat well.
Easy to clean.
Always match pot

diameter to element size.

Curved and warped pan.

Pan larger than cooking area

marked on cooktop by more

than one-half inch or 12mm.

Heavy handle tilts pan.

Pan is smaller or larger

than heating area marked

on cooktop.

Cookware material types

The cookware material determines how evenly and quickly

heat is transferred from the surface element to the pan

bottom. The most popular materials available are:

Aluminum - Excellent heat conductor. Some types of food

will cause it to darken (Anodized aluminum cookware

resists staining & pitting). If aluminum pans slide across the

ceramic cooktop, they may leave metal marks which will

resemble scratches. Remove these marks immediately.

Copper - Excellent heat conductor but discolors easily. May

leave metal marks on ceramic glass (see Aluminum).

Stainless - Slow heat conductor with uneven cooking

results. Is durable, easy to clean and resists staining.

Cast Iron - A slow heat conductor however will retain heat

very well. Cooks evenly once cooking temperature is

reached. Not recommended for use on ceramic cooktops.

Porcelain-enamel on metal - Heating characteristics will

vary depending on base material. Porcelain-enamel coating

must be smooth to avoid scratching ceramic cooktops.

Glass - Slow heat conductor. Not recommended for

ceramic cooktop surfaces because it may scratch the glass.

Using proper cookware

The size and type of cookware used will influence the

setting needed for best cooking results. Be sure to follow

the recommendations for using proper cookware as

illustrated in Figs. 2 & 3.

Cookware should have flat bottoms that make good contact

with the entire surface heating element (See Fig. 2). Check

for flatness by rotating a ruler across the bottom of the

cookware (See Fig. 3). For more information about the

ceramic cooktop see “Cooktop Cleaning & Maintenance” in

the Care & Cleaning section.

Fig. 2

Fig. 3

Advertising