FRIGIDAIRE 316902300 - Manual (Page 20)

20
SETTING OVEN CONTROLS
When the set bake time runs out:
1. "END" will appear in the display window and the oven
will shut-off automatically (See Fig. 2).
2. The control will beep 3 times every 30 seconds as a
reminder until the cancel key pad is pressed.
To program the oven for a delay start and to shut-off
automatically (example for baking at 375°F for 50
minutes and starting at 5:30):
Step Press
To program oven for delayed bake time
and to shut-off automatically
The delay start feature allows you to set a starting and
ending time to the baking process. Prior to setting a delay
start, be sure the time of day is set correctly. If the delay
start needs to be set more than 12 hours in advance (12-24
hours), the control must first be programmed for 24 hour
display mode. See “Setting 12 or 24 hour display modes”
section.
After the delay start feature has activated and started
the cooking process, press the bake time pad to display
the bake time remaining.
The delay start feature may be used with the convect
or convect convert cooking features. Bake time will
not operate when using the broil or convect broil
features.
NOTES
FOOD POISONING HAZARD. Do not let food sit for more
than one hour before or after cooking. Doing so can result
in food poisoning or sickness.
WARNING
Fig. 1 Fig. 2
1. Press bake time.
2. Enter 50 mintues.
3. Press start.
4. Press delay start (See Fig. 1).
5. Enter 530.
6. Press and hold start.
7. Enter 375.
8. Press start.