Fisher & Paykel DD60D 7 - Manual (Page 14)

14
x4
13b REFIT THE DRAWER ONTO THE RUNNERS
2
1
4
5
3
Before refitting the drawer,
ensure the hoses are not
twisted and the latches at
the rear of each drawer
runner are facing forward.
Ensure the release tabs on
both sides are reset fully.
Ensure the drawer
is now rotated
clockwise back.
11b
To access the side brackets,
you might have to push aside
the insulation. After securing,
ensure the sound insulation is
repositioned correctly.
Secure using two
pairs of formed
brackets. Repeat on
the other side of the
chassis.
12b OPTIONALLY SECURE TO THE CABINETRY ABOVE
(x2)
The top mounting
brackets will only
bend upwards a
maximum of 10 mm.
SECURE TO THE CABINETRY ON THE SIDES
For further adjustment,
using the most appropriate
length Hexagonal socket
supplied, fully extend
levelling feet up to
required distance by hand.
Ensure product is level and
aligning with cabinetry.
Hexagonal
socket
Pull fo
rward the r
elease tabs
on both sides 100
mm