Connect inlet hose to cold water plug product in – Fisher & Paykel DD60D 7 User Manual
Page 20
20
THERE ARE TWO DIFFERENT PLUMBING AND DRAINAGE OPTIONS. CHOOSE WHICH IS MORE SUITABLE.
23
3
1
750-882.5 mm
2
*
1
2
38 mm
max.
120
mm
750-882.5 mm
*
If space is limited
for fixing, push
hose through drain
hose support
to required height
If space is limited
for fixing, push
hose through drain
hose support
to required height
Dishwasher using sink trap with drain hose joiner
750 - 882.5 mm
750 - 882.5 mm
min. R 200 mm
min. R 200 mm
Supplied drain
hose joiner
19 mm
waste tee
Ensure drain hose is routed
straight to joiner. Remove
excess drain hose material if
necessary.
Do not shorten the inlet
hose.
Dishwasher and Standpipe Ø 38
mm
HIGHLOOP
min. 150 mm
24
24
3
4
5
Ensure the
supplied
rubber
washer is
fitted inside
the coupling.
Tighten coupling with spanner.
180
o
No leaks!
CONNECT INLET HOSE TO COLD WATER
PLUG PRODUCT IN
24
25
1
2
see
see
Important!
Do not connect the
drain hoses to a waste
disposal unit, as this
type of connection
may lead to a blockage
in the drain hoses.