Fisher & Paykel DD60D 7 - Manual (Page 17)

17
INTEGRATED MODELS WITH REMOTE (NZ AU) ONLY - INSTALLING THE FRONT PANELS
ADJUST PANEL HEIGHT TO ALIGN THE CABINETRY GAPS FITTING A CUSTOM TOEKICK PANEL 19a 20a
You can optionally glue your
custom toekick panel onto the
supplied panel
With the front panels fitted, insert an appropriately
sized Philips screwdriver into the hole above the door
pin and rotate the panels up or down to align the gaps
in your cabinetry.
Repeat on the other side if necessary.
Each panel has a maximum travel of 2 mm up or down.
Important!
Ensure that you maintain a minimum of 8 mm ventilation
gap between the upper and lower panels.
+ or - 2 mm
16 mm x5