Frymaster 24G Series - Manual (Page 24)

24G SERIES FLATBOTTOM GAS FRYERS
CHAPTER 3: INSTALLATION INSTRUCTIONS
3-9
3.5 Adjustments/Adaptation To Different Gases
WARNING
Qualified personnel
MUST MUST MUST MUST perform any adaptation, modification, or gas conversion,
if required. Failure to use qualified personnel will void the Dean warranty.
1. Proper operation of appliances requires operator to inspect the following adjustments in
Section 3.6 in terms of gas inputs and pressures.
2. Dean 24G Series Flatbottom gas fryers are manufactured to use the type of gas and pressure
specified on the rating plate. When changing gas, adaptation must be performed by
qualified personnel as defined in Section 1.5. Failure to use qualified personnel will void
the Dean warranty.
DANGER
This appliance was configured at the factory for a specific type of gas. Converting
from one gas type to another requires the installation of specific gas-conversion
components.
Switching to a different type of gas without installing the proper conversion
components may result in fire or explosion. NEVER ATTACH THIS APPLIANCE TO A
GAS SUPPLY FOR WHICH IT IS NOT CONFIGURED!
Conversion of this appliance from one type of gas to another should only be
performed by qualified, licensed, and authorized installation or service personnel, as
defined in Section 1.5 of this manual.