4 recommended spare parts – Frymaster 24G Series User Manual

Page 45

Advertising
background image

24G SERIES FLATBOTTOM GAS FRYERS

CHAPTER 7: TROUBLESHOOTING

7-4

7.4 Recommended Spare Parts

Commonly replaced parts in older 24G Series Flatbottom gas fryers are:

Gas Valve-24V, CE – G20/G25 – 807-2091
Gas Valve-24V, CE – G31– 807-2127
Gas Valve-24V, Non-CE – Natural – 807-3555
Gas Valve-24V, Non-CE – LP/Propane – 807-3690
Gas Valve-120V, Non-CE – Natural – 810-2156
Gas Valve-120V, Non-CE – Propane – 810-2323
Burner Tubes – 810-2129
High-Limit Thermostat, CE – 410°F (210°C) – 807-3560
High-Limit Thermostat, Non-CE – 435°F (224°C) – 807-3559
Thermocouple, Non-CE – 807-3550
Thermocouple, CE 810-1152
Temperature Sensor Probe – 106-0882SP
Thermatron Interface Board, Non-CE 120V – 807-3566
Thermatron Interface Board, CE 208/230V – 807-3722
Potentiometer, Thermatron Controller – 807-3536
Power Switch – 807-3574
Boil-Out Switch (6-Terminal) – 807-3579
Fryer Reset Switch (Momentary) – 807-3576
Filter Power Switch (Manual) – 807-3580
Blower Motor, 120V – 807-3573
Blower Motor, 230V – 106-3088SP
Sail Switch (Air Prover Switch) – 807-3746
Ignition Module – 807-3554
Direct Spark Ignitor Assembly – 106-1643SP
Ignition Cable – 106-1644SP
Sense Wire, Direct Spark Ignitor – 106-1645SP

Advertising