GE 28118 - Manual (Page 12)

1
6. Allow the phone to charge for 1 hours prior to first use. If you don’t properly charge the
phone, battery performance is compromised.
CAUTION: To reduce risk of personal injury, fire, or damage use only the
5-2760 power adaptor listed in the user’s guide. This power adaptor
is intended to be correctly orientated in a vertical or floor mount
position.
Answering System Setup
This section shows you how to set up your answering system to receive incoming calls. Before
you begin the set up process, you must turn on the answering system.
• Press the ans on/off button to turn the answering system on and off.
The MESSAGES indicator lights when the answering system is on. The indicator blinks when
you have new messages.
NOTE: The answering system displays “- -” when it is off.
Setting the Voice Prompt Language
The default voice prompt language is English.
To change the answering system’s voice prompt language,
• Press the language button on front of base to change to the FRENCH voice prompt. The
unit announces “ OPTION FRANCAISE “ and Fr shows in the message counter.
• Press the language button again to change to the SPANISH voice prompt. The unit
announces “ SELECCION ESPANOL” and SP shows in the message counter.
NOTE: To change to English, press the language button again. En shows in
the message counter.
NOTE: In remote access mode, the system follows the selected language.
The voice prompt language cannot be switched remotely.
Voice Time/Day Stamp and Real Time Clock
1. Make sure the answering system is ON.
. Press and hold the day/check button to set the day of the week.
3. Press and hold the hour button to set the hour (a.m. or p.m.). Example: 12AM, 1AM, or
12PM, 1PM.