GE 28118 - Manual (Page 20)

0
3. Use the touch-tone pad to enter the selection, or use the vol/CID (6 or 5) button to scroll
to the 1ON or 2OFF. The default setting is 2OFF.
4. Press the menu ok/mute button to confirm. You will hear a confirmation tone and the new
setting shows in the display.
Rings to Answer (for answering system)
This feature lets you select the number of times you want the phone to ring before the
answering system answers a call.
From the Handset Setup Menu:
1. Press the vol/CID ( 6 or 5) button to scroll to the RING TO ANSWER sub-menu.
. Press menu ok/mute button to enter the menu. RING TO ANSWER 3 4 5 6 TS shows in the
display.
3. Use the vol/CID ( 6 or 5) button to scroll to the your selection. The default setting is 5.
4. Press the menu ok/mute button to confirm. You will hear a confirmation tone and the new
setting shows in the display.
NOTE: If you select Toll Saver (TS) the unit answers after the 3rd ring if
there are NEW messages, OR the unit answers after the 5th ring if there
are NO new messages. This allows user to access their answerer from
another location and then hang up after 4 rings to save long distance
charges.
Security Code (for answering system)
You can access the answering system from a tone dialing telephone in another (remote)
location. The security code is required for remote access, and it prevents unauthorized access
to your answering system.
From the Handset Setup Menu:
1. Press the vol/CID ( 6 or 5) button to scroll to the SECURITY CODE sub-menu.
. Press menu ok/mute button to enter the menu. SECURITY CODE 1 2 3 shows in the display.
3. Use the touch-tone pad to enter your new 3-digit security code. The default setting is 123.
4. Press the menu ok/mute button to confirm. You will hear a confirmation tone and the new
security code shows in the display.
NOTE: If you make a mistake, use the del/conf/intercom button to delete
the security code and begin again.