GE 28118 - Manual (Page 18)

18
VIP Melody
This feature allows you to assign a specific melody to someone you want to get your
attention when the person calls. When a VIP melody is assigned and that person calls,
the unit rings the normal ring for the first ring and then follows with VIP melody ring. You
may choose from ten different polyphonic melodies and may store up to 10 VIP records.
NOTE: This feature ONLY works when the following conditions are met.
1. You have subscribed to Caller ID.
2. You have your Caller ID record previously transferred to the memory.
(Refer to Storing CID Records in Internal Memory). NO USER memory will
show in the display to remind the user to do CID record transfer first.
Storing VIP Melody
From the Handset Setup Menu:
1. Press the vol/CID ( 6 or 5) button to scroll to VIP MELODY sub-menu.
. Press the menu ok/mute button to select VIP MELODY feature and then display VIP 1
record.
- If VIP1 does NOT contain any specific number/records, it will display EMPTY.
3. Press vol/CID ( 6 or 5) button to select the specific VIP melody memory location (10 VIP
locations) that does not contain any record.
4. Press the menu ok/mute button to display SELECT MEMORY.
NOTE: If the memory location does not contain any CID memory records
and you are trying to mark a specific record as VIP MELODY, then SELECT
MEMORY will not be displayed. Instead, NO USER MEMORY will display in
prompt to alert the user.
5. Press vol/CID ( 6 or 5) button to view the records from memory to be selected as VIP.
6. Press the menu ok/mute button to confirm and then display
VIP MELODY 01 to wait for the
melody tone selection.
7. Press vol/CID ( 6 or 5) button to select from melody 01 to melody 10
(a testing tone is generated while making melody selection)
8. Press the menu ok/mute button to confirm.
NOTE: If the desired number/record was previously stored in any one of
the ten VIP melody records, DUPLICATE NUMBER shows in the display.