GE 28118 - Manual (Page 17)

17
4. Press the menu ok/mute button to save your name. You will hear a confirmation tone and
the handset name shows in the display.
Ringer Tone
You may choose from ten different ringer tones and ten different melodies.
From the Handset Setup Menu:
1. Press the vol/CID ( 6 or 5) button to scroll to the RINGER TONE sub-menu.
. Press the menu ok/mute button to enter the menu. SET RINGER TONE 01 shows in the
display. The default setting is 01.
3. Use the vol/CID ( 6 or 5) button to scroll to the desired setting (1 through 0). You will
hear a sample of the ringer tone/melody you select.
4. Press the menu ok/mute button to save your selection. You will hear a confirmation tone
and the selected ringer tone shows in the display.
NOTE: You must have the Ringer Volume set to ON for ring tone to signal
an incoming call.
Ringer Volume
From the Handset Setup Menu:
1. Press the vol/CID ( 6 or 5) button to scroll to the RINGER VOLUME sub-menu.
. Press the menu ok/mute button to enter the menu. SET RINGER 41HI 2LO 3OFF shows in
the display. The default setting is HI.
3. Use the touch tone pad on the handset to select 1,  or 3, or use the vol/CID
( 6 or 5) button to scroll to your selection. HI is the default setting.
4. Press the menu ok/mute button to save your selection. You will hear a confirmation tone
and the new volume setting shows in the display.
NOTE: If you turn the ringer OFF, the ringer off icon shows in the display.
Shortcut to the ringer volume function:
1. Make sure the phone is
OFF (not in talk mode).
. Press the #pause/ringer button to display SET RINGER 1HI 2LOW 3OFF.
3. Use the touch tone pad on the handset to select 1,  or 3, or use the vol/CID
( 6 or 5) button to scroll to your selection.
4. Press #pause/ringer button again to save and display the new selection for a few seconds.