Grizzly G0458 - Manual (Page 13)

Model G0458 (Mfg. Since 5/11)
-11-
Wear safety glasses dur-
ing the entire set up pro-
cess!
this machine presents
serious injury hazards
to untrained users. read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
section 3: setup
the model g0458 is a
heavy machine. do not
over-exert yourself while
unpacking or moving
your machine—get assis-
tance.
the following are needed to complete the setup
process, but are not included with your machine:
description Qty
•
Safety glasses (for each person) ................1
• Assistants ....................................................2
• Wrench or Socket 13mm .............................1
• Wrench or Socket 14mm .............................2
• hex Wrench 4mm ........................................2
• phillips head Screwdriver............................1
• Wood Blocks ..............................(three 2x4s)
• Wood Shims ...............................(as needed)
needed for setup
Your machine was carefully packaged for safe
transportation. Remove the packaging materials
from around your machine and inspect it. If you
discover any damage, please call us immediately
at (570) 546-9663 for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, inventory the contents.
unpacking
SUFFOCATION HAZARD!
Keep children and pets away
from plastic bags or packing
materials shipped with this
machine. Discard immediately.