GE Industrial Solutions Digital Energy GT Series 1-3kVA - Rack Mount - Manual (Page 7)

OPM_GTU_19X_1K0_3K0_XUS_V014 6 GT-UL Series: User manual 1.2 (US)
Digital Energy ™ GT Series
g
2.1 Package contents
The packing box contains a Digital Energy™ GT Series-UL UPS, an RS232 data cable, a CD
ROM, two mounting brackets with screws and this manual. Carefully inspect the packing box
and its contents. If any damage is visible please immediately notify the carrier and/or dealer.
2.2 Location
Please refer to section 1.3 of ‘IMPORTANT SAFETY INSTRUCTIONS’
2.3 Rear panel
1 Input
AC utility supply power to the UPS
2 Input breaker
Protects the UPS from damage
caused by high input currents
3 Output receptacles
To connect the critical load to the
UPS
4 Output circuit breaker
Protects the UPS from damage
caused by output overload
5 DC connector
To connect external battery pack
for extended runtime
6 Fan
Electronically controlled cooling
fan. Make sure ventilation air can
move freely around and trough the
UPS.
7 Communication interface
RS232/dry contact. Allows
communication between computer
and UPS. See chapter 4 for more
detailed information.
8 TVSS - Transient Voltage Surge
Suppressor (RJ-45/RJ-11): To
prevent damage caused by surges,
noise and spikes traveling over the
telephone or network line.
(Optional)
9 SNMP Slot
An (optional) SNMP adapter can be
plugged into this port for managing
the UPS via the network. See
chapter 4 for more detailed
information.
9 5 6
7 1
8 2 3
3 5 1 2 6 8 9
7
9 8 6 2 1 3 5
4 7
8 7 6 2 8 3
4 5 1 9
1000VA
1500VA
2200VA
3000VA
Fig 2.1 Rear panels
2 - Installation