GE Industrial Solutions Digital Energy GT Series 1-3kVA - Rack Mount - Manual (Page 8)

OPM_GTU_19X_1K0_3K0_XUS_V014 7 GT-UL Series: User manual 1.2 (US)
Digital Energy ™ GT Series
g
2.4 Installation
The unit should be installed by service personnel.
IMPORTANT:
Before making any connection and switching on the UPS, please check the following
conditions:
• Mains supply is 100/110/120 Volts and 50/60Hz,
• Total power demand of the connected equipment does not exceed the rated output
power of the UPS (indicated on the rating label).
2.4.1 Mounting in a 19” enclosure
1. Install the mounting bracket. See fig. 2.2.
2. Adjust the rails and gently slide UPS into the rails. See fig. 2.3.
3. Fix mounting bracket on the enclosure by screws. See fig. 2.3.
2.4.2 Vertical installation
The UPS is rack mountable as well as
standing alone. You can mount the UPS
on the shelf, or you can erect the UPS
with supporting stands (not included in
delivery) as shown in fig 2.4.
1
2
3
Fig 2.2 Installing the mounting brackets Fig 2.3 Mounting the UPS
Fig 2.4 Vertical installation
Supporting stands
(not included)