Stovax PR0731 - Manual (Page 23)

23
SERVICING INSTRUCTIONS
REPLACING PARTS
19
AR1345
14.7 Disconnect the touch pad from the harness (DESIGNIO
FRAME ONLY)
14.8 Disconnect the ignition lead from the electrode.
14.9 Remove the thermocouple. See diagram 20 arrow C.
14.10 Remove the pilot pipe and ensure the pilot injector is kept
safe, Diagram 20, Arrow D
20
AR1994
D
C
F E F
14.11 Remove the injector feed pipe from the valve, Diagram 20,
Arrow E.
14.12 Remove the two screws securing the control bracket to the
appliance, Diagram 20, Arrow F
14.13 Tilt the front edge of the bracket down slightly and move
the assembly to the right. The assembly can now be lifted
clear of the appliance.
14.4 Reassemble in reverse order and check for gas leaks.