User instruction, Installation details, Hot surfaces – Stovax PR0731 User Manual

Page 7: Battery replacement, Fire will not light

Advertising
background image

7

USER INSTRUCTION

8. INSTALLATION DETAILS

8.1 To assist in any future correspondence, your installer should

have completed the commissioning sheet at the front of this

book, this records the essential installation details of the

appliance. In all correspondence always quote the Model

number and Serial number.

9. HOT SURFACES

9.1 Parts of this appliance become hot during normal use. It is

therefore recommended that a suitable fire guard be used

for protection of young children and the infirm. Indeed, all

parts of the appliance should be treated as a 'working

surface' except for the control touch pad area and access

panel (Designio version only).

10. BATTERY REPLACEMENT

10.1 If the Linea is fitted with a Designio front, access to the

batteries can be achieved by simply dropping the lower

front access cover.

10.2 If the Linea is fitted with a Plano, Vetro or Steel front,

access to the batteries can be achieved through the access

hole in the casing below the unit, Diagram 6.

6

AR1341

10.3 Replace the batteries with four ‘AA’ size cells, ensuring they

are in the correct orientation as shown in the diagram in the

base of the plastic holder.

10.4 Once the batteries have been replaced, carefully locate the

battery holder back into its cradle in the base of the

appliance.

11. FIRE WILL NOT LIGHT

11.1 If you cannot light the Linea:

• Check that the emergency shut off switch is in the ON

(1) position, see Section 2, Emergency Shut Off

• Check and change the batteries in the remote handset

• Check and change the appliance batteries, Section 10.

Consult your Gazco dealer if the Linea still does not light.

Advertising