GE 15339430 - Manual (Page 24)

20
H
OLD
P
LACING A
C
ALL ON
H
OLD
1. Press HOLD. The indicator for the line on hold flashes green.
2. Hang up or press another line button.
The phone emits a beep every 30 seconds as a reminder. At the other
stations, the indicator will blink red but no beep will be heard.
NOTE: If you put a call on HOLD while in PRIVACY mode, no one but you
can access the line on hold. Anyone trying to access the line will receive an
error tone.
P
ICKING
U
P A
C
ALL ON
H
OLD
1. Lift the handset, or press SPEAKERPHONE or HEADSET.
2. Press the line on hold.
NOTE: The call on hold can be picked up at any station using this procedure.
F
LASH
Use the FLASH button to activate custom calling services such as call waiting
or call transfer, which are available through your local phone company.
T
EMPORARY
T
ONE
If you have pulse (rotary) service, and want to access customer calling
services that require tone dialing (such as getting information from a local
bank), you can use this feature.
• Press the TONE button ( * ) after you have connected to the customer
calling service to enable tone dialing.
When you hang up, the phone automatically resumes pulse dialing.
TIP: Temporary Tone can also be used while storing numbers in memory by
pressing TONE ( * ) at the necessary point in the storage sequence.