GE 15339430 - Manual (Page 34)

30
C
HANGING A
S
TORED
N
UMBER
If you want to change the stored number, simply enter the new number
over the old number using the previous memory storing procedure. To
erase a stored number, press STORE IN twice, then the memory location
you want to erase.
S
TORING A
C
HAIN OF
N
UMBERS
You can link together a dialing sequence of phone numbers in separate
memory locations by combining them in a single memory location or have
another memory location stored in one of the locations to be linked.
For example Memory Location
Local access number of long 6
distance company
Authorization code (ID) 7
Where entire sequence is to be stored 8
including long distance phone number
Storing
1. Press STORE IN.
2. Press memory location 6.
3. Press PAUSE.
4. Press memory location 7.
5. Press PAUSE.
6. Enter long distance number.
7. Press STORE IN.
8. Press location 8, where the entire location is to be stored.
9. Write the name for this location on the memory index card.
NOTE: When a chain number is stored in a memory location, it cannot be
stored as another chain number sequence in a separate memory location.