GE 15339430 - Manual (Page 27)

23
• If the party at the other station doesn’t pick up the transferred call,
and you wish to attempt to transfer to another station, press the line
you want and repeat the transfer process.
• If the station number you pressed is not valid, you will hear an error
tone and the transfer cancels.
• If the party you pressed is in Do Not Disturb mode, DND shows on the
display. The transfer is cancelled and the call is put on hold.
• If the party’s station is busy, BUSY shows on the display.
R
ECEIVING A
T
RANSFER FROM
A
NOTHER
S
TATION
If a call is being transferred to your station, you will hear a different ring
sound. The indicator of the line being transferred to you flashes yellow. To
answer the call, press that line button.
If you are on the line when a call is being transfered to you, you will hear 3
pending beeps to alert you of the call and the light will flash yellow. You
can put your current call on hold by pressing HOLD, then pick up the new
transfered call by pressing the line button.
NOTE : During the transfer, the only two stations that can access the line being
transferred are: a) the transferring station, or; b) the station receiving the
transfer.