GE Coil Top - Manual (Page 20)

Latch the door.
Turn the Oven Temperature knob to
CLEAN.
Press the START TIME ON/OFF pad.
Press the HOUR and MIN. pads to set
the time cleaning will start.
When the CLEAN light flashes, and the
oven has completely cooled, slide the latch
handle to the left as far as it will go and
turn the Oven Temperature knob to OFF.
20
Using the self-cleaning oven.
(on some models)
Before a Clean Cycle
The range must be completely cool in order to set
the self-clean cycle.
We recommend venting with an open
window or using a ventilation fan or hood
during the first self-clean cycle.
Remove the shelves, broiler pan, broiler
grid, all cookware and any aluminum foil
from the oven.
The oven shelves can be self-cleaned, but
they will darken, lose their luster and
become hard to slide.
Soil on the front frame of the range and
outside the gasket on the door will need to
be cleaned by hand. Clean these areas with
hot water, soap-filled steel-wool pads or
cleansers such as Soft Scrub®. Rinse well
with clean water and dry.
Do not clean the gasket. The fiberglass
material of the oven door gasket cannot
withstand abrasion. It is essential for the
gasket to remain intact. If you notice it
becoming worn or frayed, replace it.
IMPORTANT: The health of some birds is
extremely sensitive to the fumes given off
during the self-cleaning cycle of any range.
Move birds to another well ventilated room.