Before you call for service – GE Coil Top User Manual

Page 38

Advertising
background image

38

Operating

Instructions

Safety Instructions

Care and Cleaning

Installation

Instructions

Troubleshooting T

ips

Consumer Support

Before You Call For Service…

Troubleshooting Tips

Problem

Possible Causes

What To Do

Oven temperature too

Oven thermostat

See the Adjust the oven thermostat—Easy to do

hot or too cold

needs adjustment.

yourself!

section.

Clock and timer do

Plug on range is not completely

Make sure electrical plug is plugged into a live, properly

not work

inserted in the electrical outlet.

grounded outlet.

A fuse in your home may be

Replace fuse or reset circuit breaker.

blown or the circuit breaker
tripped.

Oven controls improperly set.

See the Using the clock and timer section.

The display goes blank or

Power surge.

Disconnect power at the fuse box or circuit breaker

indicator lights come on

for at least 10 seconds. Turn power on and power up

when range is not in use

your range. If the indicator lights are still on, call for

service.

Oven door is crooked

The door is out of position.

Because the oven door is removable, it sometimes gets

out of position during installation. To straighten the

door, push down on the high corner.

Oven makes

This is the sound of the

This is normal.

clicking noise

heating element turning
off and on during
cooking functions.

“F—and a number”

You have a function error code.

Disconnect all power to the range for 5 minutes

flash in the display

and then reconnect power. If the function error code

repeats, call for service.

On self-cleaning models, if a function error code

appears during the self-cleaning cycle, check the oven

door latch. The latch may have been moved, even if

only slightly, from the locked position. Make sure the

latch is moved to the right as far as it will go. Turn the

Oven Temperature knob to OFF. Allow the oven to

cool for one hour. Put the oven back into operation.

Power outage

Power outage or surge.

Some models will automatically resume their setting once

the power is restored. On models with a clock, you must

reset the clock. If the oven was in use, you must reset it by

turning the Oven Temperature knob back to OFF, setting

the clock and resetting any cooking function.

Advertising