GE 15381860 - Manual (Page 14)

14
R
EVIEWING
C
ALL
R
ECORDS
• Press either the REVIEW up or REVIEW down button
to view the newest call record.
• Press the REVIEW down button to scroll through the
call records from the most recent to the oldest.
• Press the REVIEW up button to scroll through the call
records from the oldest to the newest.
• When all of the messages have been viewed, START/
END appears in the display.
D
ELETING
C
ALL
R
ECORDS
• To delete the record shown in the display, press the
DELETE button once. “DELETE?” appears in the
display. Press DELETE again to complete.
• To delete all records while reviewing, press and hold
the DELETE button for about 3 seconds (until NO
CALL appears in the display).
D
IALING
B
ACK
When reviewing Caller ID records, you can dialback the
numbers shown on the display by pressing the DIAL
button.
NOTE: This feature DOES NOT work when the
handset is picked up.
I
F YOU PROGRAMMED YOUR LOCAL AREA
CODE IN THE SETUP MENU
1. Use the REVIEW up and down buttons to display the
number you want to dial. If you see a number with 7
digits (i.e. 555-1234), then the call was received from
within your area code. However, this does not
guarantee the call is a local call. If you see a number
with 11 digits (i.e. 1-234-555-1234), then the call
received was not from your area code.
2. Press the DIAL button and the display shows “PICKUP
or ADJ”. A 15 second timer will also start at this point
on the upper right side of the display, letting you know
the time until the unit will return to the Caller ID record.
If you adjust the number to be dialed, the timer will
reset after each adjustment.