GE 15381860 - Manual (Page 19)

19
T
O
E
RASE A
S
TORED
N
UMBER
1. Pick up the handset.
2. Press STORE.
3. Press STORE again.
4. Press the location (A, B, 0-9) to be erased.
T
O
U
SE
P
AUSE
(R
EDIAL
)
The REDIAL button becomes a pause function when the
STORE button has been pressed first. It is valid only
when storing a number into memory locations.
Use the PAUSE (REDIAL) button to insert a pause when a
delay is needed in an automatic dialing sequence. For
example, when you must dial a 9 to get an outside line or
when you enter codes to access you long distance
company.
You may need to adjust the length of the pause duration.
It can be adjusted from 1 to 9 seconds. The default setting
is 4 seconds.
1. Pick up the handset.
2. Press the STORE button.
3. Press 1-9 (1=1 second, 2=2 seconds, etc.)
4. Press STORE again.
5. Press the PAUSE (REDIAL) button to save.
T
O
U
SE
F
LASH
This button is used to activate customer calling services
available through your local phone company, such as Call
Waiting. These services generally require an extra
monthly fee. If you subscribe to any of these services,
please refer to the phone company’s instructions on how
to use FLASH.
T
O
U
SE
T
EMPORARY
T
ONE
D
IALING
If you have pulse service, you can temporarily change
from pulse to tone service. After dialing the telephone
number, press and release the * button on the telephone.
This allows access to phone services that require a tone,
such as banking and long-distance services. After you
hang up the handset, the telephone automatically returns
to pulse service.