Grizzly G0504 - Manual (Page 20)

-18- G0504 16" Horizontal Resaw Bandsaw
Removing Resaw
from Crate Pallet
To remove the resaw from the crate pallet:
1. Remove the lag bolts from the stand feet that
secure the resaw to the crate pallet.
2. Using a forklift, lift the resaw from the frame
location shown in Figure 11, and move it to
your predetermined location.
Figure 11. Lifting points for moving the resaw
with a forklift.
The Model G0504 is a
heavy machine that
weighs approximately
3300 lbs. Serious per-
sonal injury may occur if
safe moving methods are
not followed. To be safe,
you will need assistance
and power equipment
when moving the ship-
ping crate and remov-
ing the machine from the
crate.
Mounting Resaw to
the Floor
Although not required, we recommend that you
mount your new machine to the floor. Because
this is an optional step and floor materials may
vary, floor mounting hardware is not included.
Bolting to Concrete Floors
Lag shield anchors with lag bolts and anchor
studs (
Figure 12) are two popular methods for
anchoring an object to a concrete floor. We sug-
gest you research the many options and methods
for mounting your machine and choose the best
that fits your specific application.
NOTICE
Anchor studs are stronger and more per-
manent alternatives to lag shield anchors;
however, they will stick out of the floor,
which may cause a tripping hazard if you
decide to move your machine.
Figure 12. Typical fasteners for mounting to
concrete floors.