Step-by-step instructions (cont.) – GE 234D1050P001 User Manual
Page 13
Advertising
13
GEAppliances.com
STEP-BY-STEP INSTRUCTIONS (cont.)
Reinstall Hinge Assembly
7.
Install the hinge assembly in the opposite side of the door as shown . Push the
hinge assembly in place until the hinge holes align with the door holes .
8.
Hold the hinge and door on their side with one hand and fasten the 6
machine screws as shown .
Reinstall Hinge Cover
9.
Insert the hinge cover . Align the hinge cover holes with the holes in the door .
10
. Secure the hinge cover with 2 taping screws .
Machine
screws
Hinge
Cover
Tapping
Screws
Advertising